VMware ESXi vSwitch settings for INE lab

1. Configuration > Hardware > Networking
2. Select the vSwitch which the GigabitEthernet1 are attached to, click on Properties
3. Select the vSwitch and click Edit
4. Select All (4095) from the VLAN ID downdown

INE-CCNP ROUTE-IP Routing Overview

Personal notes regarding Frame Relay

Each of the connection need to be manually mapped

R2 static route points to s0/0 will need additional DLCI mapping under the serial0/0 interface. Map each of the routes individually to work. Using the debug command will show the encapsulation failure.

*Mar  1 01:31:26.115: Serial0/0:Encaps failed--no map entry link 7(IP).

Commands

# show frame-relay map - equivalent to show arp
# show frame-relay pvc xxx
# debug frame-relay packet
# debug frame-relay detail

Topology

Frame Relay switching

Configurations

R1

!
frame-relay switching
!
interface Loopback0
 ip address 1.1.1.1 255.255.255.255
!
interface Serial0/0
 ip address 10.0.0.1 255.255.255.0
 encapsulation frame-relay
 clock rate 2000000
 frame-relay map ip 10.0.0.2 103 broadcast
 frame-relay map ip 10.0.0.3 103 broadcast
!
ip route 2.2.2.2 255.255.255.255 10.0.0.2
ip route 3.3.3.3 255.255.255.255 10.0.0.3

R2

!
frame-relay switching
!
interface Loopback0
 ip address 2.2.2.2 255.255.255.255
!
interface Serial0/0
 ip address 10.0.0.2 255.255.255.0
 encapsulation frame-relay
 clock rate 2000000
 frame-relay map ip 1.1.1.1 203
 frame-relay map ip 10.0.0.3 203 broadcast
 frame-relay map ip 10.0.0.1 203
!
ip route 0.0.0.0 0.0.0.0 Serial0/0

R3

!
frame-relay switching
!
interface Loopback0
 ip address 3.3.3.3 255.255.255.255
!
interface Serial0/1
 ip address 10.0.0.3 255.255.255.0
 encapsulation frame-relay
 clock rate 2000000
 frame-relay map ip 10.0.0.2 302 broadcast
 frame-relay map ip 10.0.0.1 301 broadcast
!
ip route 1.1.1.1 255.255.255.255 10.0.0.1
ip route 2.2.2.2 255.255.255.255 10.0.0.2